[lsmith526]

OK guys and gals, alot of people helped me on my tilt and trim, now, since i lost a water pump this past weekend I need some more of your knowledge!!

I replaced the impeller on my motor that is on the puddle jumper, 60hp mariner, of course when i put the foot back on, neutral is now forward. So, my question is, do I have to remove the foot completely again, or can I just bring it down and reach in and move the rod to change it? And how do I know I've got it correct??

Any help would be great, yall have been alot of help before, and I'm sure someone out there knows the answer

Thanks again,,

Lee

 

[lsmith526]

Yes, when I took the foot off, it was in neutral, i guess during the change out of the impeller i hit something and moved the linkage. Hopefully i can lower the foot alittle and the linkage will come loose at the top where it fits into the shaft coming down from the top. That would be so much easier, just have no idea of, if I can or does the hole foot have to come off and which way do i turn the little sucker when I get to it.

Again, thanks for the help guys, guess I should have carried it to the shop, but they are 3 wks out in the service dept.

Any ideas, PLEASE let me know and thanks again, gonna try and hit it again!

Lee

 

[lsmith526]

Thanks guys, got it going and fished sat. and sun. now that's another story for the books! Cold front kicked my butt.

Thanks again,

Cya on the Water