I made a video the other day of how to make an In-Line Spinner and this is the final product. This was made with my TwisTech wire bender and lure parts. I started with a straight piece of wire and made the bends and twits with TwisTech then strung on the parts as I went. I used a #4 treble then a brass bead. Next I slipped on a prepainted 1/4oz lead lure body followed by a nickel bead. Then finished with a clevis & #2 french blade that I applied a gold prism pattern decal to. The final eye can be direct tied or a split ring added for a swivel.
118.8 KB Views: 92