Bass Fishing Forums - The Bassholes banner
1 - 1 of 1 Posts

·
Registered
Joined
·
612 Posts
Good reply. I think the chromed bearing buddys are slightly tapered, so if there's grease on the two surfaces and the cap is old it can slide off. If you have the center lube type bearings, the seal rubbers can, as Huntangler said, be bought at most boat stores. One of the few things that doesn't cost an arm and a leg.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top