how to make a core shot video with bears baits molds and injector

[tylerd1994]

i thought i would just show you guys this video it helps if you dont know how to do a coreshot

sorry about it being chopped up


Guests are not allowed to view links.
Register or Login

tylerd1994 - 118_1538.flv

Guests are not allowed to view links.
Register or Login

tylerd1994 - 118_1539.flv

Guests are not allowed to view links.
Register or Login

tylerd1994 - 118_1540.flv

Guests are not allowed to view links.
Register or Login

tylerd1994 - 118_1542.flv

finished product              Guests are not allowed to view links.
Register or Login

http://i664.photobucket.com/albums/vv4/tylerd1994/118_15432.jpg

  "Thank You":
1. CaptainMo    

[Fish4FunInFl]

Thanks Tyler I have watched it many times at Bears. Once I get some molds that will allow me to do it, I will give it a try. ( The 2 molds I have right now, wont do it, well, not the way you did it, by pouring first color and not injecting it )

I do have one question for you though. Unless I misunderstood what you said. Your not sucking up the plastic with the injector, but pouring it into the injector ? Are you taking the tip off and pulling the plunger back, then pour into the injector. The put the tip back on ?

[tylerd1994]

Thanks. Well sometimes I do not use enough plastic just to suck up the plastic. So i do exactly what you said take off tip pull the plunger back pour into it then put the tip back on. If im using alot of plastic i just suck it up

[Fish4FunInFl]

Thanks for explaining

[Fish4FunInFl]

One more question for you Tyler . If you was using the injector instead of hand pouring, would you let it bottom out, then inject the core ? Or would you have to stop it just prior to bottoming out and inject the core ?

[tylerd1994]

If i am understanding your question right, I dont think you can use the injector for the first step. What happens is when you pour the plastic into the sprue hole it sets there in the sprue. And once you inject the core color it pushes it through causing the core. So i dont think you can inject a little bit then inject another color. That would probably result in the bait being half one color half another.

[Fish4FunInFl]

ahh, ok, thanks